"Motion Study is a means to permanent and practical waste elimination, — hence a prerequisite to efficient preparedness that shall be adequate, constructive and cumulative."

“Micro-motion study, presented for the first time at this meeting, is a new and accurate method of recording and transmitting skill. Based upon the principles of motion study and time study, it makes possible simultaneous measurement of both time and path of motions. It produces an entirely different result from any of the methods attempted by its predecessors, in that it shows a measured difference in the time of day on each and every cinematograph picture, even when the pictures are taken at a rate much faster than ever considered in work where positive films are printed and projected upon the screen.”

“The aim of the process chart is to present information regarding existing and proposed processes in such simple form that such information can become available to and usable by the greatest possible number of people in an organization before any changes whatever are actually made, so that the special knowledge and suggestions of those in positions of minor importance can be fully utilized.”

“Process-chart notes and information should be collected and set down in sketch form by a highly intelligent man, preferably with an engineering training and experience, but who need not necessarily have been previously familiar with the actual details of the processes. In fact, the unbiased eye of an intelligent and experienced process-chart maker usually brings better results than does the study of a less keen man with more special information regarding present practices of the processes. The mere act of investigating sufficiently to make the notes in good enough condition for the draftsman to copy invariably results in many ideas and suggestions for improvement, and all of these suggestions, good and bad, should be retained and filed together with the description of the process chart. These suggestions and proposed improvements must be later explained to others, such as boards of directors, managers and foremen, and for best results also to certain workmen and clerks who have special craft or process knowledge. To overcome the obstacles due to habit, worship of tradition and prejudice, the more intelligence shown by the process-chart recorder, the sooner hearty cooperation of all concerned will be secured. Anyone can make this form of process chart with no previous experience in making such charts, but the more experience one has in making them, the more certain standard combinations of operations, inspection and transporting can be transferred bodily to advantage to the charts of proposed processes.”

“This country has been so rich in human and material resources that it is only recently that the importance of waste elimination has come to be realized. The material element received the first consideration, and in the comparatively few years during which the subject has received attention, an enormous amount has been done to conserve natural resources, to economize in the use.”

“The greatest misunderstandings occur as to the aims of scientific management. Its fundamental aim is the elimination of waste, the attainment of worth-while desired results with the least necessary amount of time and effort. Scientific management may, and often does, result in expansion, but its primary aim is conservation and savings, making an adequate use of every ounce of energy of any type that is expended.”

“There is no industrial opportunity that offers a richer return than the elimination of needless motions, and the transformation of ill-directed and ineffective motions into efficient activity.”